[1970-Jan-01 00:00:57.960901]: Log level: info
[1970-Jan-01 00:00:58.372927]: Initializing component: PrinterPanelController
[1970-Jan-01 00:00:58.621379]: Initializing component: PrinterPanelGui
[1970-Jan-01 00:01:18.089244]: Setting language to en
[1970-Jan-01 00:01:18.406835]: Loaded font :/resources/Antenna-Black.otf
[1970-Jan-01 00:01:18.409001]: Loaded families Antenna
[1970-Jan-01 00:01:18.602927]: Loaded font :/resources/Antenna-Bold.otf
[1970-Jan-01 00:01:18.604772]: Loaded families Antenna
[1970-Jan-01 00:01:18.822475]: Loaded font :/resources/Antenna-Regular.otf
[1970-Jan-01 00:01:18.824391]: Loaded families Antenna
[1970-Jan-01 00:01:18.981765]: Loaded font :/resources/Antenna-Medium.otf
[1970-Jan-01 00:01:18.983629]: Loaded families Antenna
[1970-Jan-01 00:01:28.847879]: (UDEV Monitor): Successfully created udev
[1970-Jan-01 00:01:42.434784]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:01:42.546229]: Language de requests antenna which is always ok
[1970-Jan-01 00:01:42.548156]: Language en requests antenna which is always ok
[1970-Jan-01 00:01:42.549898]: Language es requests antenna which is always ok
[1970-Jan-01 00:01:42.551956]: Language es_la requests antenna which is always ok
[1970-Jan-01 00:01:42.553744]: Language fr requests antenna which is always ok
[1970-Jan-01 00:01:42.555550]: Language it requests antenna which is always ok
[1970-Jan-01 00:01:42.566258]: Looking for fonts NotoSansCJKjp*
[1970-Jan-01 00:01:42.743936]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:42.745794]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:42.747678]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:42.749491]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:42.751656]: Found font type NotoSansCJKjp-Black
[1970-Jan-01 00:01:42.753472]: Found font type NotoSansCJKjp-Bold
[1970-Jan-01 00:01:42.755290]: Found font type NotoSansCJKjp-Medium
[1970-Jan-01 00:01:42.757073]: Found font type NotoSansCJKjp-Regular
[1970-Jan-01 00:01:42.759077]: All font types found for ja
[1970-Jan-01 00:01:42.767986]: Looking for fonts NotoSansCJKkr*
[1970-Jan-01 00:01:42.919782]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:42.931996]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:42.933814]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:42.935609]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:42.937555]: Found font type NotoSansCJKkr-Black
[1970-Jan-01 00:01:42.939408]: Found font type NotoSansCJKkr-Bold
[1970-Jan-01 00:01:42.951579]: Found font type NotoSansCJKkr-Medium
[1970-Jan-01 00:01:42.953408]: Found font type NotoSansCJKkr-Regular
[1970-Jan-01 00:01:42.955873]: All font types found for ko
[1970-Jan-01 00:01:42.957848]: Language pr requests antenna which is always ok
[1970-Jan-01 00:01:42.959746]: Looking for fonts NotoSansCJKsc*
[1970-Jan-01 00:01:43.133977]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:43.136005]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:43.137825]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:43.139658]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:43.141681]: Found font type NotoSansCJKsc-Black
[1970-Jan-01 00:01:43.143608]: Found font type NotoSansCJKsc-Bold
[1970-Jan-01 00:01:43.145411]: Found font type NotoSansCJKsc-Medium
[1970-Jan-01 00:01:43.148264]: Found font type NotoSansCJKsc-Regular
[1970-Jan-01 00:01:43.150333]: All font types found for zh
[1970-Jan-01 00:01:43.154016]: Available langs:  de en es es_la fr it ja ko pr zh
[1970-Jan-01 00:01:43.829316]: loading status icon height 40 width 14
[1970-Jan-01 00:01:43.836948]: Loaded initial menu item
[1970-Jan-01 00:01:43.932100]: Done loading menu items
[1970-Jan-01 00:02:04.973846]: BasePanel not calling onEntry because not current: Get Started
[1970-Jan-01 00:02:07.881180]: Starting component: PrinterPanelController
[1970-Jan-01 00:02:07.885822]: Starting component: PrinterPanelGui
[1970-Jan-01 00:02:07.933902]: Connecting via socket: /tmp/kaiten.socket
[1970-Jan-01 00:02:08.068778]: Registering printerpanel RPC method: allow_unknown_firmware
[1970-Jan-01 00:02:08.102014]: Registering printerpanel RPC method: authorize_user
[1970-Jan-01 00:02:08.104107]: Registering printerpanel RPC method: error_acknowledged
[1970-Jan-01 00:02:08.106955]: Registering printerpanel RPC method: error_notification
[1970-Jan-01 00:02:08.108680]: Registering printerpanel RPC method: extruder_change
[1970-Jan-01 00:02:08.120703]: Registering printerpanel RPC method: firware_updates_info_change
[1970-Jan-01 00:02:08.122467]: Registering printerpanel RPC method: font_notification
[1970-Jan-01 00:02:08.124208]: Registering printerpanel RPC method: network_state_change
[1970-Jan-01 00:02:08.125942]: Registering printerpanel RPC method: print_file_valid
[1970-Jan-01 00:02:08.127818]: Registering printerpanel RPC method: request_user_input
[1970-Jan-01 00:02:08.129599]: Registering printerpanel RPC method: reset_to_factory
[1970-Jan-01 00:02:08.142392]: Registering printerpanel RPC method: start_diagnostics
[1970-Jan-01 00:02:08.144492]: Registering printerpanel RPC method: state_notification
[1970-Jan-01 00:02:08.146316]: Registering printerpanel RPC method: system_notification
[1970-Jan-01 00:02:08.171337]: Connected!

[1970-Jan-01 00:02:15.381109]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:15.788557]: Connected Kaiten has version 2.6.1.724
[1970-Jan-01 00:02:15.837475]: DeauthAccountsPanel::setAccountNum(0) stage: 0
[1970-Jan-01 00:02:16.039299]: Move to main screen in splashdone
[1970-Jan-01 00:02:16.315600]: BotModel::stateNotification
[1970-Jan-01 00:02:28.666860]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:02:28.715174]: (UDEV Monitor): Transitioned to state: 3
[1970-Jan-01 00:08:47.858774]: BotModel::stateNotification
[1970-Jan-01 00:08:49.064661]: BotModel::stateNotification
[1970-Jan-01 00:11:42.655715]: BotModel::stateNotification
[1970-Jan-01 00:11:59.999883]: BotModel::stateNotification
[1970-Jan-01 00:12:00.434850]: BotModel::stateNotification
[1970-Jan-01 00:12:00.865393]: BotModel::stateNotification
[1970-Jan-01 00:12:05.638316]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 00:13:49.927616]: BotModel::stateNotification
[1970-Jan-01 00:13:51.111204]: load standard step change: running
[1970-Jan-01 00:13:51.184431]: BotModel::stateNotification
[1970-Jan-01 00:13:51.258284]: load standard step change: preheating
[1970-Jan-01 00:13:52.178584]: BotModel::stateNotification
[1970-Jan-01 00:13:52.260690]: load standard step change: extrusion
[1970-Jan-01 00:14:44.408076]: BotModel::stateNotification
[1970-Jan-01 00:14:44.477992]: load standard step change: cleaning_up
[1970-Jan-01 00:14:44.888856]: BotModel::stateNotification
[1970-Jan-01 00:14:44.958480]: load standard step change: done
[1970-Jan-01 00:14:44.979410]: load filament completed
[1970-Jan-01 00:14:45.088013]: BotModel::stateNotification
[1970-Jan-01 00:14:51.509700]: BotModel::stateNotification
[1970-Jan-01 00:14:51.679834]: BotModel::stateNotification
[1970-Jan-01 00:14:51.858973]: BotModel::stateNotification
[1970-Jan-01 00:14:51.930270]: BotModel::stateNotification
[1970-Jan-01 00:14:59.780475]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:14:59.789169]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 00:14:59.880825]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:14:59.980407]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:00.080496]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:00.180359]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:00.280476]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:00.380542]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:02.880439]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:02.980297]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:03.080774]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:03.087068]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 00:15:03.880966]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:04.007033]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:05.580484]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:06.931241]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:06.945440]: (UDEV Monitor): Transitioned to state: 3
[1970-Jan-01 00:15:08.980788]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:08.987572]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 00:15:09.080402]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:09.180529]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:09.280466]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:09.380448]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:09.480692]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:15:09.580450]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:48.280493]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:48.380448]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:48.480454]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:48.487432]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 00:21:49.280445]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:49.380500]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:50.880443]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:52.180403]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 00:21:52.194925]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-01 00:22:04.257033]: FilePrintDialog::startPrintClicked()
[1970-Jan-01 00:22:04.535402]: PrintProcess state change: 1
[1970-Jan-01 00:22:07.588589]: print monitor shown
[1970-Jan-01 00:22:07.603898]: BotModel::stateNotification
[1970-Jan-01 00:22:07.710833]: built from filename
[1970-Jan-01 00:22:08.349213]: BotModel::stateNotification
[1970-Jan-01 00:22:08.461197]: Step change error: 48
[1970-Jan-01 00:22:08.463004]: PrintProcess state change: 15
[1970-Jan-01 00:22:09.136764]: print monitor shown
[1970-Jan-01 00:22:10.031740]: Setting error code
[1970-Jan-01 00:22:10.216477]: BotModel::stateNotification
[1970-Jan-01 00:22:10.303650]: Step change error: 48
[1970-Jan-01 00:22:10.305454]: PrintProcess state change: 29
[1970-Jan-01 00:22:10.322071]: print monitor shown
[1970-Jan-01 00:22:10.754669]: BotModel::stateNotification
[1970-Jan-01 00:22:10.833918]: Step change error: 48
[1970-Jan-01 00:22:10.835776]: PrintProcess state change: 28
[1970-Jan-01 00:22:23.933532]: print monitor shown
[1970-Jan-01 00:22:23.952134]: print monitor shown
[1970-Jan-01 00:22:23.970551]: print monitor shown
[1970-Jan-01 00:22:24.293479]: BotModel::stateNotification
[1970-Jan-01 00:22:24.353022]: PrintProcess state change: 31
[1970-Jan-01 00:22:24.355070]: PrintProcess state change: 0
[1970-Jan-01 00:22:24.358598]: BotModel::stateNotification
[1970-Jan-01 00:22:26.973862]: FilePrintDialog::startPrintClicked()
[1970-Jan-01 00:22:27.258804]: PrintProcess state change: 1
[1970-Jan-01 00:22:29.306223]: print monitor shown
[1970-Jan-01 00:22:30.021314]: BotModel::stateNotification
[1970-Jan-01 00:22:30.107559]: built from filename
[1970-Jan-01 00:22:30.717349]: BotModel::stateNotification
[1970-Jan-01 00:22:30.806119]: Step change error: 48
[1970-Jan-01 00:22:30.808077]: PrintProcess state change: 15
[1970-Jan-01 00:22:31.344063]: print monitor shown
[1970-Jan-01 00:22:32.158068]: Setting error code
[1970-Jan-01 00:22:32.292109]: BotModel::stateNotification
[1970-Jan-01 00:22:32.370969]: Step change error: 48
[1970-Jan-01 00:22:32.372816]: PrintProcess state change: 29
[1970-Jan-01 00:22:32.391387]: print monitor shown
[1970-Jan-01 00:22:32.690681]: BotModel::stateNotification
[1970-Jan-01 00:22:32.763486]: Step change error: 48
[1970-Jan-01 00:22:32.765320]: PrintProcess state change: 28
[1970-Jan-01 00:30:42.032960]: print monitor shown
[1970-Jan-01 00:30:42.051787]: print monitor shown
[1970-Jan-01 00:30:42.070262]: print monitor shown
[1970-Jan-01 00:30:42.385230]: BotModel::stateNotification
[1970-Jan-01 00:30:42.463226]: PrintProcess state change: 31
[1970-Jan-01 00:30:42.465296]: PrintProcess state change: 0
[1970-Jan-01 00:30:42.505879]: BotModel::stateNotification
[1970-Jan-01 01:02:40.922596]: FilePrintDialog::startPrintClicked()
[1970-Jan-01 01:02:41.205162]: PrintProcess state change: 1
[1970-Jan-01 01:02:43.226586]: print monitor shown
[1970-Jan-01 01:02:43.937752]: BotModel::stateNotification
[1970-Jan-01 01:02:44.035371]: built from filename
[1970-Jan-01 01:02:44.644895]: BotModel::stateNotification
[1970-Jan-01 01:02:44.731302]: Step change error: 48
[1970-Jan-01 01:02:44.733088]: PrintProcess state change: 15
[1970-Jan-01 01:02:45.265704]: print monitor shown
[1970-Jan-01 01:02:46.110394]: Setting error code
[1970-Jan-01 01:02:46.246930]: BotModel::stateNotification
[1970-Jan-01 01:02:46.328100]: Step change error: 48
[1970-Jan-01 01:02:46.340291]: PrintProcess state change: 29
[1970-Jan-01 01:02:46.348533]: print monitor shown
[1970-Jan-01 01:02:46.657012]: BotModel::stateNotification
[1970-Jan-01 01:02:46.752877]: Step change error: 48
[1970-Jan-01 01:02:46.754708]: PrintProcess state change: 28
[1970-Jan-01 01:03:13.417682]: print monitor shown
[1970-Jan-01 01:03:13.436553]: print monitor shown
[1970-Jan-01 01:03:13.455089]: print monitor shown
[1970-Jan-01 01:03:13.780551]: BotModel::stateNotification
[1970-Jan-01 01:03:13.859173]: PrintProcess state change: 31
[1970-Jan-01 01:03:13.866927]: PrintProcess state change: 0
[1970-Jan-01 01:03:13.878603]: BotModel::stateNotification
[1970-Jan-01 01:03:16.253417]: FilePrintDialog::startPrintClicked()
[1970-Jan-01 01:03:16.544073]: PrintProcess state change: 1
[1970-Jan-01 01:03:17.085510]: print monitor shown
[1970-Jan-01 01:03:17.087714]: BotModel::stateNotification
[1970-Jan-01 01:03:17.160897]: built from filename
[1970-Jan-01 01:03:33.399193]: BotModel::stateNotification
[1970-Jan-01 01:03:33.477721]: Step change error: 48
[1970-Jan-01 01:03:33.479652]: PrintProcess state change: 15
[1970-Jan-01 01:03:33.531373]: print monitor shown
[1970-Jan-01 01:03:35.721716]: Setting error code
[1970-Jan-01 01:03:35.905427]: BotModel::stateNotification
[1970-Jan-01 01:03:35.984876]: Step change error: 48
[1970-Jan-01 01:03:35.986672]: PrintProcess state change: 29
[1970-Jan-01 01:03:36.006175]: print monitor shown
[1970-Jan-01 01:03:36.859084]: BotModel::stateNotification
[1970-Jan-01 01:03:36.931273]: Step change error: 48
[1970-Jan-01 01:03:36.933132]: PrintProcess state change: 28
[1970-Jan-01 01:05:08.597508]: BotModel::stateNotification
[1970-Jan-01 01:05:08.662021]: PrintProcess state change: 31
[1970-Jan-01 01:05:08.664266]: PrintProcess state change: 0
[1970-Jan-01 01:05:08.682269]: BotModel::stateNotification
[1970-Jan-01 01:05:09.013170]: PrintProcess state change: 1
[1970-Jan-01 01:05:09.692656]: print monitor shown
[1970-Jan-01 01:05:09.694729]: BotModel::stateNotification
[1970-Jan-01 01:05:09.791920]: built from filename
[1970-Jan-01 01:05:10.782313]: BotModel::stateNotification
[1970-Jan-01 01:05:10.861793]: PrintProcess state change: 6
[1970-Jan-01 01:05:10.925465]: print monitor shown
[1970-Jan-01 01:05:56.643993]: BotModel::stateNotification
[1970-Jan-01 01:05:56.727397]: Step change error: 48
[1970-Jan-01 01:05:56.729206]: PrintProcess state change: 15
[1970-Jan-01 01:05:56.756282]: print monitor shown
[1970-Jan-01 01:05:58.941995]: Setting error code
[1970-Jan-01 01:05:59.337654]: BotModel::stateNotification
[1970-Jan-01 01:05:59.415284]: Step change error: 48
[1970-Jan-01 01:05:59.417071]: PrintProcess state change: 29
[1970-Jan-01 01:05:59.435896]: print monitor shown
[1970-Jan-01 01:06:00.606682]: BotModel::stateNotification
[1970-Jan-01 01:06:00.688433]: Step change error: 48
[1970-Jan-01 01:06:00.700988]: PrintProcess state change: 28
[1970-Jan-01 01:06:17.514338]: BotModel::stateNotification
[1970-Jan-01 01:06:17.591586]: PrintProcess state change: 31
[1970-Jan-01 01:06:17.593873]: PrintProcess state change: 0
[1970-Jan-01 01:06:17.605140]: BotModel::stateNotification
[1970-Jan-01 01:06:17.962114]: PrintProcess state change: 1
[1970-Jan-01 01:06:18.779547]: print monitor shown
[1970-Jan-01 01:06:18.839673]: BotModel::stateNotification
[1970-Jan-01 01:06:18.942005]: built from filename
[1970-Jan-01 01:06:19.625387]: BotModel::stateNotification
[1970-Jan-01 01:06:19.706415]: PrintProcess state change: 6
[1970-Jan-01 01:06:19.725441]: print monitor shown
[1970-Jan-01 01:07:45.665686]: BotModel::stateNotification
[1970-Jan-01 01:07:45.745802]: PrintProcess state change: 9
[1970-Jan-01 01:07:45.765995]: print monitor shown
[1970-Jan-01 01:08:58.180330]: BotModel::stateNotification
[1970-Jan-01 01:08:58.260559]: PrintProcess state change: 10
[1970-Jan-01 01:08:58.269411]: print monitor shown
[1970-Jan-01 01:09:31.364606]: BotModel::stateNotification
[1970-Jan-01 01:09:31.445785]: PrintProcess state change: 7
[1970-Jan-01 01:09:31.465150]: print monitor shown
[1970-Jan-01 01:10:32.346117]: BotModel::stateNotification
[1970-Jan-01 01:10:32.417237]: PrintProcess state change: 13
[1970-Jan-01 01:10:32.440748]: print monitor shown
[1970-Jan-01 02:51:16.175961]: BotModel::stateNotification
[1970-Jan-01 02:51:16.252081]: PrintProcess state change: 14
[1970-Jan-01 02:51:16.272521]: print monitor shown
[1970-Jan-01 02:51:16.318851]: BotModel::stateNotification
[1970-Jan-01 02:51:16.398583]: PrintProcess state change: 29
[1970-Jan-01 02:51:16.502870]: print monitor shown
[1970-Jan-01 02:51:34.832655]: BotModel::stateNotification
[1970-Jan-01 02:51:34.910966]: PrintProcess state change: 30
[1970-Jan-01 02:51:34.927650]: print monitor shown
[1970-Jan-01 02:53:52.892283]: BotModel::stateNotification
[1970-Jan-01 02:53:52.958769]: PrintProcess state change: 31
[1970-Jan-01 02:53:52.968731]: print monitor shown
[1970-Jan-01 02:53:52.970916]: PrintProcess state change: 0
[1970-Jan-01 02:53:53.033627]: BotModel::stateNotification
[1970-Jan-01 02:53:56.148126]: print monitor shown
[1970-Jan-01 02:53:56.156676]: print monitor shown
[1970-Jan-01 02:53:56.165525]: print monitor shown
[1970-Jan-01 02:53:56.174057]: print monitor shown
[1970-Jan-01 02:53:56.183254]: print monitor shown
[1970-Jan-01 02:53:56.191616]: print monitor shown
[1970-Jan-01 02:53:56.200666]: print monitor shown
[1970-Jan-01 02:53:56.208860]: print monitor shown
[1970-Jan-01 02:53:56.217278]: print monitor shown
[1970-Jan-01 02:53:56.226270]: print monitor shown
[1970-Jan-01 02:53:56.324201]: print monitor shown
[1970-Jan-01 02:53:56.333020]: print monitor shown
[1970-Jan-01 02:53:56.341491]: print monitor shown
[1970-Jan-01 02:53:56.349734]: print monitor shown
[1970-Jan-01 02:53:56.426768]: print monitor shown
[1970-Jan-01 02:53:56.438395]: print monitor shown
[1970-Jan-01 02:53:56.446762]: print monitor shown
[1970-Jan-01 03:03:37.524553]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:03:37.531607]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 03:03:37.623156]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:03:37.723114]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:03:37.823127]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:03:37.923160]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:03:38.023220]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:06.260421]: BotModel::stateNotification
[1970-Jan-01 03:06:06.576695]: BotModel::stateNotification
[1970-Jan-01 03:06:06.787775]: BotModel::stateNotification
[1970-Jan-01 03:06:06.848927]: BotModel::stateNotification
[1970-Jan-01 03:06:12.868591]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:12.926280]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:13.026379]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:13.032677]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 03:06:13.833230]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:13.928603]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:15.432412]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:16.726388]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:06:16.741637]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-01 03:06:26.483805]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 03:08:24.193275]: FilePrintDialog::startPrintClicked()
[1970-Jan-01 03:08:24.512136]: PrintProcess state change: 1
[1970-Jan-01 03:08:25.215140]: print monitor shown
[1970-Jan-01 03:08:25.346997]: BotModel::stateNotification
[1970-Jan-01 03:08:25.442072]: built from filename
[1970-Jan-01 03:08:38.646600]: BotModel::stateNotification
[1970-Jan-01 03:08:38.726273]: PrintProcess state change: 8
[1970-Jan-01 03:08:38.745599]: print monitor shown
[1970-Jan-01 03:10:01.147369]: BotModel::stateNotification
[1970-Jan-01 03:10:01.225879]: PrintProcess state change: 9
[1970-Jan-01 03:10:01.238432]: print monitor shown
[1970-Jan-01 03:10:41.140514]: BotModel::stateNotification
[1970-Jan-01 03:10:41.222475]: PrintProcess state change: 10
[1970-Jan-01 03:10:41.242776]: print monitor shown
[1970-Jan-01 03:11:14.197976]: BotModel::stateNotification
[1970-Jan-01 03:11:14.284458]: PrintProcess state change: 7
[1970-Jan-01 03:11:14.294674]: print monitor shown
[1970-Jan-01 03:12:12.048028]: BotModel::stateNotification
[1970-Jan-01 03:12:12.123315]: PrintProcess state change: 13
[1970-Jan-01 03:12:12.133815]: print monitor shown
[1970-Jan-01 03:24:04.307597]: print monitor shown
[1970-Jan-01 03:24:07.039868]: BotModel::stateNotification
[1970-Jan-01 03:24:07.142743]: PrintProcess state change: 15
[1970-Jan-01 03:24:07.226722]: print monitor shown
[1970-Jan-01 03:24:08.327347]: BotModel::stateNotification
[1970-Jan-01 03:24:08.401704]: PrintProcess state change: 29
[1970-Jan-01 03:24:08.420804]: print monitor shown
[1970-Jan-01 03:24:27.108880]: BotModel::stateNotification
[1970-Jan-01 03:24:27.195851]: PrintProcess state change: 31
[1970-Jan-01 03:24:27.213257]: print monitor shown
[1970-Jan-01 03:24:27.216113]: PrintProcess state change: 0
[1970-Jan-01 03:24:27.277971]: BotModel::stateNotification
[1970-Jan-01 03:44:22.273029]: PrintProcess state change: 1
[1970-Jan-01 03:44:23.108309]: print monitor shown
[1970-Jan-01 03:44:23.296898]: BotModel::stateNotification
[1970-Jan-01 03:44:23.382053]: built from filename
[1970-Jan-01 03:44:24.086273]: BotModel::stateNotification
[1970-Jan-01 03:44:24.168031]: PrintProcess state change: 6
[1970-Jan-01 03:44:24.187774]: print monitor shown
[1970-Jan-01 03:46:26.549773]: BotModel::stateNotification
[1970-Jan-01 03:46:26.629289]: PrintProcess state change: 9
[1970-Jan-01 03:46:26.648818]: print monitor shown
[1970-Jan-01 03:46:59.363355]: BotModel::stateNotification
[1970-Jan-01 03:46:59.438653]: PrintProcess state change: 10
[1970-Jan-01 03:46:59.458908]: print monitor shown
[1970-Jan-01 03:47:32.749430]: BotModel::stateNotification
[1970-Jan-01 03:47:32.825237]: PrintProcess state change: 7
[1970-Jan-01 03:47:32.846318]: print monitor shown
[1970-Jan-01 03:48:27.829624]: BotModel::stateNotification
[1970-Jan-01 03:48:27.908909]: PrintProcess state change: 13
[1970-Jan-01 03:48:27.929101]: print monitor shown
[1970-Jan-01 03:51:19.729785]: BotModel::stateNotification
[1970-Jan-01 03:51:19.820417]: PrintProcess state change: 16
[1970-Jan-01 03:51:19.941917]: print monitor shown
[1970-Jan-01 03:51:41.853226]: BotModel::stateNotification
[1970-Jan-01 03:51:41.941170]: PrintProcess state change: 18
[1970-Jan-01 03:52:24.538303]: print monitor shown
[1970-Jan-01 03:52:26.454346]: BotModel::stateNotification
[1970-Jan-01 03:52:26.539346]: PrintProcess state change: 15
[1970-Jan-01 03:52:26.587604]: print monitor shown
[1970-Jan-01 03:52:27.474064]: BotModel::stateNotification
[1970-Jan-01 03:52:27.546325]: PrintProcess state change: 29
[1970-Jan-01 03:52:27.565495]: print monitor shown
[1970-Jan-01 03:52:44.085219]: BotModel::stateNotification
[1970-Jan-01 03:52:44.167507]: PrintProcess state change: 31
[1970-Jan-01 03:52:44.181737]: print monitor shown
[1970-Jan-01 03:52:44.184736]: PrintProcess state change: 0
[1970-Jan-01 03:52:44.254604]: BotModel::stateNotification
[1970-Jan-01 03:53:43.751169]: print monitor shown
[1970-Jan-01 03:53:43.760307]: print monitor shown
[1970-Jan-01 03:53:43.768607]: print monitor shown
[1970-Jan-01 03:53:43.777005]: print monitor shown
[1970-Jan-01 03:53:43.786057]: print monitor shown
[1970-Jan-01 03:53:43.794510]: print monitor shown
[1970-Jan-01 03:53:43.803295]: print monitor shown
[1970-Jan-01 03:53:43.811740]: print monitor shown
[1970-Jan-01 03:53:43.820774]: print monitor shown
[1970-Jan-01 03:53:43.829060]: print monitor shown
[1970-Jan-01 03:53:43.928233]: print monitor shown
[1970-Jan-01 03:53:43.941503]: print monitor shown
[1970-Jan-01 03:53:43.951349]: print monitor shown
[1970-Jan-01 03:53:43.959628]: print monitor shown
[1970-Jan-01 03:53:43.968074]: print monitor shown
[1970-Jan-01 03:53:43.977606]: print monitor shown
[1970-Jan-01 03:53:43.986089]: print monitor shown
[1970-Jan-01 03:53:43.994567]: print monitor shown
[1970-Jan-01 03:53:44.003438]: print monitor shown
[1970-Jan-01 03:53:53.634721]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 03:54:20.539745]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 03:54:53.121198]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 03:55:06.466562]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 03:55:12.521845]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 03:55:32.403784]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 03:55:38.234989]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 06:24:58.810437]: DeauthAccountsPanel::setAccountNum(1) stage: 0
[1970-Jan-01 07:04:42.111474]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 07:04:42.118421]: (UDEV Monitor): Transitioned to state: 0
[1970-Jan-01 07:04:42.196578]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 07:04:42.296673]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 07:04:42.397490]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 07:04:42.504684]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 07:04:42.596590]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:12:09.200001]: BotModel::stateNotification
[1970-Jan-01 08:12:09.338518]: BotModel::stateNotification
[1970-Jan-01 08:15:01.087594]: BotModel::stateNotification
[1970-Jan-01 08:15:18.489741]: BotModel::stateNotification
[1970-Jan-01 08:15:18.799043]: BotModel::stateNotification
[1970-Jan-01 08:15:19.084189]: BotModel::stateNotification
[1970-Jan-01 08:17:53.164321]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 08:18:44.185210]: BotModel::stateNotification
[1970-Jan-01 08:18:44.266283]: load standard step change: running
[1970-Jan-01 08:18:44.380804]: BotModel::stateNotification
[1970-Jan-01 08:18:45.563697]: load standard step change: preheating
[1970-Jan-01 08:19:32.407325]: BotModel::stateNotification
[1970-Jan-01 08:19:32.482105]: load standard step change: extrusion
[1970-Jan-01 08:19:47.339079]: BotModel::stateNotification
[1970-Jan-01 08:19:47.421700]: load standard step change: cancelling
[1970-Jan-01 08:19:49.105774]: BotModel::stateNotification
[1970-Jan-01 08:19:49.186260]: load standard step change: cleaning_up
[1970-Jan-01 08:19:49.891176]: BotModel::stateNotification
[1970-Jan-01 08:19:49.962612]: load standard step change: done
[1970-Jan-01 08:19:49.964485]: load filament cancelled
[1970-Jan-01 08:19:50.090877]: BotModel::stateNotification
[1970-Jan-01 08:20:08.718232]: BotModel::stateNotification
[1970-Jan-01 08:20:08.922000]: BotModel::stateNotification
[1970-Jan-01 08:20:09.098304]: BotModel::stateNotification
[1970-Jan-01 08:20:09.177496]: BotModel::stateNotification
[1970-Jan-01 08:21:22.696808]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:21:22.832235]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:21:22.896935]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:21:22.903968]: (UDEV Monitor): Transitioned to state: 1
[1970-Jan-01 08:21:23.696855]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:21:23.796826]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:21:25.296793]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:21:26.645764]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:21:26.661068]: (UDEV Monitor): Transitioned to state: 2
[1970-Jan-01 08:39:13.058160]: BotModel::stateNotification
[1970-Jan-01 08:39:14.317577]: BotModel::stateNotification
[1970-Jan-01 08:41:59.692929]: BotModel::stateNotification
[1970-Jan-01 08:42:17.117200]: BotModel::stateNotification
[1970-Jan-01 08:42:17.433218]: BotModel::stateNotification
[1970-Jan-01 08:42:17.714203]: BotModel::stateNotification
[1970-Jan-01 08:43:16.866315]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 08:43:57.914780]: BotModel::stateNotification
[1970-Jan-01 08:43:57.992974]: load standard step change: running
[1970-Jan-01 08:43:59.208271]: BotModel::stateNotification
[1970-Jan-01 08:43:59.292558]: load standard step change: preheating
[1970-Jan-01 08:44:00.711512]: BotModel::stateNotification
[1970-Jan-01 08:44:00.753025]: load standard step change: extrusion
[1970-Jan-01 08:44:52.890717]: BotModel::stateNotification
[1970-Jan-01 08:44:52.963622]: load standard step change: cleaning_up
[1970-Jan-01 08:44:53.450234]: BotModel::stateNotification
[1970-Jan-01 08:44:53.508441]: load standard step change: done
[1970-Jan-01 08:44:53.510519]: load filament completed
[1970-Jan-01 08:44:53.675806]: BotModel::stateNotification
[1970-Jan-01 08:44:57.945782]: BotModel::stateNotification
[1970-Jan-01 08:44:59.124954]: load standard step change: running
[1970-Jan-01 08:44:59.240342]: BotModel::stateNotification
[1970-Jan-01 08:44:59.319359]: load standard step change: preheating
[1970-Jan-01 08:45:00.270997]: BotModel::stateNotification
[1970-Jan-01 08:45:00.350508]: load standard step change: extrusion
[1970-Jan-01 08:45:14.264013]: BotModel::stateNotification
[1970-Jan-01 08:45:14.335963]: load standard step change: cancelling
[1970-Jan-01 08:45:16.038446]: BotModel::stateNotification
[1970-Jan-01 08:45:16.124440]: load standard step change: cleaning_up
[1970-Jan-01 08:45:16.729966]: BotModel::stateNotification
[1970-Jan-01 08:45:16.806091]: load standard step change: done
[1970-Jan-01 08:45:16.809088]: load filament cancelled
[1970-Jan-01 08:45:17.231262]: BotModel::stateNotification
[1970-Jan-01 08:45:18.832997]: BotModel::stateNotification
[1970-Jan-01 08:45:19.051059]: BotModel::stateNotification
[1970-Jan-01 08:45:19.218497]: BotModel::stateNotification
[1970-Jan-01 08:45:19.304945]: BotModel::stateNotification
[1970-Jan-01 08:45:22.437594]: BotModel::stateNotification
[1970-Jan-01 08:45:22.597868]: BotModel::stateNotification
[1970-Jan-01 08:45:24.896808]: BotModel::stateNotification
[1970-Jan-01 08:45:42.365759]: BotModel::stateNotification
[1970-Jan-01 08:45:42.678636]: BotModel::stateNotification
[1970-Jan-01 08:45:42.957394]: BotModel::stateNotification
[1970-Jan-01 08:45:58.305681]:  UnloadFilamentProcess::continueProcess: No active process to continue
[1970-Jan-01 08:46:01.770405]: BotModel::stateNotification
[1970-Jan-01 08:46:02.955021]: load standard step change: running
[1970-Jan-01 08:46:03.034190]: BotModel::stateNotification
[1970-Jan-01 08:46:03.107158]: load standard step change: preheating
[1970-Jan-01 08:46:04.077777]: BotModel::stateNotification
[1970-Jan-01 08:46:04.156542]: load standard step change: extrusion
[1970-Jan-01 08:46:23.477549]: BotModel::stateNotification
[1970-Jan-01 08:46:23.561659]: load standard step change: cancelling
[1970-Jan-01 08:46:23.650869]: BotModel::stateNotification
[1970-Jan-01 08:46:23.718991]: load standard step change: cleaning_up
[1970-Jan-01 08:46:24.300607]: BotModel::stateNotification
[1970-Jan-01 08:46:24.363732]: load standard step change: done
[1970-Jan-01 08:46:24.365611]: load filament cancelled
[1970-Jan-01 08:46:24.491326]: BotModel::stateNotification
[1970-Jan-01 08:46:38.749352]: BotModel::stateNotification
[1970-Jan-01 08:46:38.921972]: BotModel::stateNotification
[1970-Jan-01 08:46:39.100488]: BotModel::stateNotification
[1970-Jan-01 08:46:39.172993]: BotModel::stateNotification
[1970-Jan-01 08:46:47.052905]: (UDEV Monitor): select() says there should be data
[1970-Jan-01 08:46:50.137890]: FilePrintDialog::startPrintClicked()
[1970-Jan-01 08:46:50.479177]: PrintProcess state change: 1
[1970-Jan-01 08:46:51.090953]: print monitor shown
[1970-Jan-01 08:46:51.417388]: BotModel::stateNotification
[1970-Jan-01 08:46:51.473766]: built from filename
[1970-Jan-01 08:47:51.238839]: BotModel::stateNotification
[1970-Jan-01 08:47:51.316038]: PrintProcess state change: 6
[1970-Jan-01 08:47:51.383200]: print monitor shown
[1970-Jan-01 08:49:14.465557]: BotModel::stateNotification
[1970-Jan-01 08:49:14.544250]: PrintProcess state change: 9
[1970-Jan-01 08:49:14.624361]: print monitor shown
[1970-Jan-01 08:50:03.786469]: BotModel::stateNotification
[1970-Jan-01 08:50:03.855421]: PrintProcess state change: 10
[1970-Jan-01 08:50:03.912766]: print monitor shown
[1970-Jan-01 08:50:37.542810]: BotModel::stateNotification
[1970-Jan-01 08:50:37.622289]: PrintProcess state change: 7
[1970-Jan-01 08:50:37.691866]: print monitor shown
[1970-Jan-01 08:51:36.886563]: BotModel::stateNotification
[1970-Jan-01 08:51:36.970596]: PrintProcess state change: 13
[1970-Jan-01 08:51:37.007834]: print monitor shown
[1970-Jan-01 08:53:07.538258]: BotModel::stateNotification
[1970-Jan-01 08:53:07.603109]: PrintProcess state change: 16
[1970-Jan-01 08:53:07.670267]: print monitor shown
[1970-Jan-01 08:53:30.182662]: BotModel::stateNotification
[1970-Jan-01 08:53:30.257383]: PrintProcess state change: 18
[1970-Jan-01 08:53:55.686072]: print monitor shown
[1970-Jan-01 08:53:57.541174]: BotModel::stateNotification
[1970-Jan-01 08:53:57.608480]: PrintProcess state change: 15
[1970-Jan-01 08:53:57.678167]: print monitor shown
[1970-Jan-01 08:53:58.410467]: BotModel::stateNotification
[1970-Jan-01 08:53:58.488548]: PrintProcess state change: 29
[1970-Jan-01 08:53:58.509793]: print monitor shown
[1970-Jan-01 08:54:14.599131]: BotModel::stateNotification
[1970-Jan-01 08:54:14.679000]: PrintProcess state change: 31
[1970-Jan-01 08:54:14.699117]: print monitor shown
[1970-Jan-01 08:54:14.706159]: PrintProcess state change: 0
[1970-Jan-01 08:54:14.782388]: BotModel::stateNotification
[1970-Jan-01 08:54:19.055646]: PrintProcess state change: 1
[1970-Jan-01 08:54:19.770445]: print monitor shown
[1970-Jan-01 08:54:19.777777]: BotModel::stateNotification
[1970-Jan-01 08:54:19.866152]: built from filename
[1970-Jan-01 08:54:20.732648]: BotModel::stateNotification
[1970-Jan-01 08:54:20.814464]: PrintProcess state change: 8
[1970-Jan-01 08:54:20.832018]: print monitor shown
[1970-Jan-01 08:55:54.356773]: BotModel::stateNotification
[1970-Jan-01 08:55:54.433808]: PrintProcess state change: 9
[1970-Jan-01 08:55:54.453019]: print monitor shown
[1970-Jan-01 08:56:43.317339]: BotModel::stateNotification
[1970-Jan-01 08:56:43.386579]: PrintProcess state change: 10
[1970-Jan-01 08:56:43.406747]: print monitor shown
[1970-Jan-01 08:57:16.560745]: BotModel::stateNotification
[1970-Jan-01 08:57:16.636542]: PrintProcess state change: 7
[1970-Jan-01 08:57:16.656271]: print monitor shown
[1970-Jan-01 08:58:10.483564]: BotModel::stateNotification
[1970-Jan-01 08:58:10.561397]: PrintProcess state change: 13
[1970-Jan-01 08:58:10.577937]: print monitor shown
[1970-Jan-01 09:02:32.700248]: BotModel::stateNotification
[1970-Jan-01 09:02:32.774394]: PrintProcess state change: 16
[1970-Jan-01 09:02:32.831263]: print monitor shown
[1970-Jan-01 09:02:54.203737]: BotModel::stateNotification
[1970-Jan-01 09:02:54.279984]: PrintProcess state change: 18
[1970-Jan-01 09:03:21.726462]: print monitor shown
[1970-Jan-01 09:03:21.955448]: BotModel::stateNotification
[1970-Jan-01 09:03:22.034301]: PrintProcess state change: 15
[1970-Jan-01 09:03:22.092738]: print monitor shown
[1970-Jan-01 09:03:24.467910]: BotModel::stateNotification
[1970-Jan-01 09:03:24.544490]: PrintProcess state change: 29
[1970-Jan-01 09:03:24.564726]: print monitor shown
[1970-Jan-01 09:03:40.730508]: BotModel::stateNotification
[1970-Jan-01 09:03:40.797227]: PrintProcess state change: 31
[1970-Jan-01 09:03:40.820675]: print monitor shown
[1970-Jan-01 09:03:40.823425]: PrintProcess state change: 0
[1970-Jan-01 09:03:40.908345]: BotModel::stateNotification
[1970-Jan-01 09:04:24.007689]: PrintProcess state change: 1
[1970-Jan-01 09:04:26.072824]: print monitor shown
[1970-Jan-01 09:04:26.836466]: BotModel::stateNotification
[1970-Jan-01 09:04:26.935016]: built from filename
[1970-Jan-01 09:04:27.574870]: BotModel::stateNotification
[1970-Jan-01 09:04:27.662108]: Step change error: 48
[1970-Jan-01 09:04:27.663920]: PrintProcess state change: 15
[1970-Jan-01 09:04:27.688824]: print monitor shown
[1970-Jan-01 09:04:28.551857]: Setting error code
[1970-Jan-01 09:04:28.693398]: BotModel::stateNotification
[1970-Jan-01 09:04:28.776202]: Step change error: 48
[1970-Jan-01 09:04:28.778020]: PrintProcess state change: 29
[1970-Jan-01 09:04:28.796720]: print monitor shown
[1970-Jan-01 09:04:29.405134]: BotModel::stateNotification
[1970-Jan-01 09:04:29.487324]: Step change error: 48
[1970-Jan-01 09:04:29.489183]: PrintProcess state change: 28
[1970-Jan-01 09:04:45.255163]: print monitor shown
[1970-Jan-01 09:04:45.273846]: print monitor shown
[1970-Jan-01 09:04:45.295321]: print monitor shown
[1970-Jan-01 09:04:45.451907]: print monitor shown
[1970-Jan-01 09:04:45.471155]: print monitor shown
[1970-Jan-01 09:04:45.491613]: print monitor shown
[1970-Jan-01 09:04:45.511389]: print monitor shown
[1970-Jan-01 09:04:45.519834]: print monitor shown
[1970-Jan-01 09:04:45.539508]: print monitor shown
[1970-Jan-01 09:04:45.558245]: print monitor shown
[1970-Jan-01 09:04:45.578407]: print monitor shown
[1970-Jan-01 09:04:45.597338]: print monitor shown
[1970-Jan-01 09:04:45.617078]: print monitor shown
[1970-Jan-01 09:04:45.755952]: print monitor shown
[1970-Jan-01 09:04:45.766321]: print monitor shown
[1970-Jan-01 09:04:45.774923]: print monitor shown
[1970-Jan-01 09:04:45.785370]: print monitor shown
[1970-Jan-01 09:04:45.793932]: print monitor shown
[1970-Jan-01 09:04:45.804613]: print monitor shown
[1970-Jan-01 09:04:45.815411]: print monitor shown
[1970-Jan-01 09:04:45.825269]: print monitor shown
[1970-Jan-01 09:04:45.835058]: print monitor shown
[1970-Jan-01 09:04:45.844913]: print monitor shown
[1970-Jan-01 09:04:45.883674]: BotModel::stateNotification
[1970-Jan-01 09:04:45.963585]: PrintProcess state change: 31
[1970-Jan-01 09:04:45.965646]: PrintProcess state change: 0
[1970-Jan-01 09:04:45.969009]: BotModel::stateNotification
[1970-Jan-01 09:04:49.122865]: FilePrintDialog::startPrintClicked()
[1970-Jan-01 09:04:49.446045]: PrintProcess state change: 1
[1970-Jan-01 09:04:50.150353]: print monitor shown
[1970-Jan-01 09:04:50.322390]: BotModel::stateNotification
[1970-Jan-01 09:04:50.405860]: built from filename
[1970-Jan-01 09:05:40.328811]: BotModel::stateNotification
[1970-Jan-01 09:05:40.415479]: PrintProcess state change: 6
[1970-Jan-01 09:05:40.435479]: print monitor shown
[1970-Jan-01 09:07:19.617803]: BotModel::stateNotification
[1970-Jan-01 09:07:19.688157]: PrintProcess state change: 9
[1970-Jan-01 09:07:19.709466]: print monitor shown
[1970-Jan-01 09:08:08.655290]: BotModel::stateNotification
[1970-Jan-01 09:08:08.732079]: PrintProcess state change: 10
[1970-Jan-01 09:08:08.752972]: print monitor shown
[1970-Jan-01 09:08:42.129803]: BotModel::stateNotification
[1970-Jan-01 09:08:42.202895]: PrintProcess state change: 7
[1970-Jan-01 09:08:42.222711]: print monitor shown
[1970-Jan-01 09:09:39.110803]: BotModel::stateNotification
[1970-Jan-01 09:09:39.191992]: PrintProcess state change: 13
[1970-Jan-01 09:09:39.204372]: print monitor shown
[1970-Jan-01 09:10:14.095942]: BotModel::stateNotification
[1970-Jan-01 09:10:14.173996]: PrintProcess state change: 17
[1970-Jan-01 09:10:14.244724]: print monitor shown
[1970-Jan-01 09:10:35.579887]: BotModel::stateNotification
[1970-Jan-01 09:10:35.658932]: PrintProcess state change: 19
[1970-Jan-01 09:10:35.668548]: print monitor shown
[1970-Jan-01 09:10:35.760802]: BotModel::stateNotification
[1970-Jan-01 09:10:35.800227]: PrintProcess state change: 11
[1970-Jan-01 09:10:35.810956]: print monitor shown
[1970-Jan-01 09:10:45.720605]: BotModel::stateNotification
[1970-Jan-01 09:10:45.774775]: PrintProcess state change: 19
[1970-Jan-01 09:10:45.785947]: print monitor shown
[1970-Jan-01 09:10:47.249484]: BotModel::stateNotification
[1970-Jan-01 09:10:47.331344]: PrintProcess state change: 13
[1970-Jan-01 09:10:47.353352]: print monitor shown
[1970-Jan-01 09:11:07.384619]: BotModel::stateNotification
[1970-Jan-01 09:11:07.469342]: PrintProcess state change: 17
[1970-Jan-01 09:11:07.537996]: print monitor shown
[1970-Jan-01 09:11:30.240921]: BotModel::stateNotification
[1970-Jan-01 09:11:30.314314]: PrintProcess state change: 19
[1970-Jan-01 09:11:30.334105]: print monitor shown
[1970-Jan-01 09:11:30.438040]: BotModel::stateNotification
[1970-Jan-01 09:11:30.485079]: PrintProcess state change: 11
[1970-Jan-01 09:11:30.495926]: print monitor shown
[1970-Jan-01 09:11:31.820752]: BotModel::stateNotification
[1970-Jan-01 09:11:31.882263]: PrintProcess state change: 19
[1970-Jan-01 09:11:31.900732]: print monitor shown
[1970-Jan-01 09:11:36.849409]: BotModel::stateNotification
[1970-Jan-01 09:11:36.919023]: PrintProcess state change: 13
[1970-Jan-01 09:11:36.945830]: print monitor shown
[1970-Jan-01 09:11:56.557065]: BotModel::stateNotification
[1970-Jan-01 09:11:56.643633]: PrintProcess state change: 17
[1970-Jan-01 09:11:56.703640]: print monitor shown
[1970-Jan-01 09:12:09.573832]: print monitor shown
[1970-Jan-01 09:12:11.460378]: BotModel::stateNotification
[1970-Jan-01 09:12:11.539601]: PrintProcess state change: 15
[1970-Jan-01 09:12:11.603795]: print monitor shown
[1970-Jan-01 09:12:18.327724]: BotModel::stateNotification
[1970-Jan-01 09:12:18.408224]: PrintProcess state change: 29
[1970-Jan-01 09:12:18.455237]: print monitor shown
[1970-Jan-01 09:12:34.585466]: BotModel::stateNotification
[1970-Jan-01 09:12:34.665567]: PrintProcess state change: 31
[1970-Jan-01 09:12:34.684343]: print monitor shown
[1970-Jan-01 09:12:34.687058]: PrintProcess state change: 0
[1970-Jan-01 09:12:34.753355]: BotModel::stateNotification
[1970-Jan-01 09:12:39.728114]: print monitor shown
[1970-Jan-01 09:12:39.742918]: print monitor shown
[1970-Jan-01 09:12:39.752284]: print monitor shown
[1970-Jan-01 09:12:39.760667]: print monitor shown
[1970-Jan-01 09:12:39.768873]: print monitor shown
[1970-Jan-01 09:12:39.777335]: print monitor shown
[1970-Jan-01 09:12:39.786377]: print monitor shown
[1970-Jan-01 09:12:39.794784]: print monitor shown
[1970-Jan-01 09:12:39.803633]: print monitor shown
[1970-Jan-01 09:12:39.812046]: print monitor shown
[1970-Jan-01 09:12:39.821037]: print monitor shown
[1970-Jan-01 09:12:39.829287]: print monitor shown
[1970-Jan-01 09:12:39.837724]: print monitor shown
[1970-Jan-01 09:12:39.846754]: print monitor shown
[1970-Jan-01 09:12:39.855574]: print monitor shown
[1970-Jan-01 09:12:39.863933]: print monitor shown
[1970-Jan-01 09:12:39.872357]: print monitor shown
[1970-Jan-01 09:12:39.881816]: print monitor shown
[1970-Jan-01 09:12:39.890278]: print monitor shown
[1970-Jan-01 09:12:39.898476]: print monitor shown
[1970-Jan-01 09:12:49.786712]: DeauthAccountsPanel::setAccountNum(1) stage: 0